Edgewater Networks 4200 Series Manual de usuario descargar pdf (Pagina 30)

Page 30

LAN sub-interface Configuration:

Step 3

The Firewall must be configured to pass through VoIP protocols to the EdgeMarc. The

firewall can not perform NAT, if it does it will break VoIP protocol.

Since the EdgeMarc is a VoIP proxy, all VoIP packets will have a source or destination

IP address of the EdgeMarc’s WAN interface. This can be used to help set up

appropriately tight rules on the Firewall.

The Firewall must be opened for the following ports (to and from the EdgeMarc):

In all cases

FTP TCP 21

HTTP TCP 80

RTP UDP 16386:21785

SNMP UDP 161

SSH TCP 22

Telnet TCP 23

TFTP UDP 69

SNTP TCP 123

MGCP phones

MGCP UDP 2427, 2429, 2432, 2727

SIP phones

SIP UDP 5060

1 2 ... 25 26 27 28 29 30 31

Sin comentarios

Edgewater Networks 4200 Series Manual de usuario Pagina 30